|
|
People keep asking me for this, so here it is, the Windows 7/Vista Shutdown hotkey combination:
On the keyboard, press:
START then RIGHT ARROW then SPACE
Alternatively:
CTRL-ESC then RIGHT ARROW then SPACE
L!NGO branded ATA iAN-02EX Adapter Unlock Hack
Unit: L!ngo: iAN-02EX
Firmware: 2.8.2.63b (some steps may be different for other revisions)
contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.
So, you had the l!ngo service, or obtained an old l!ngo adapter, and now you need to re-program it? Here are the instructions!
WARNING: This will erase the settings on your device. Don’t do this unless you mean to use it with a different voip provider than l!ngo!
LEGAL: Anyone worried about whether or not its legal to hack a device you own and no longer use, go see a shrink or find something else to spend your time worrying about. Do this proceedure at your own risk. We in no way claim responsibility.
To set up another voip provider, or even a SIP IP PBX, follow these instructions. I can’t take complete credit for this, but I must admit I
could not find it all in one place so here I have assembled and embelished it.
Set your computer’s local IP address to 172.25.25.2 (it must be on the subnet for the adapter config)
You need to HARD RESET this box while not connected on the internet via attached telephone to phone port 1
Double check: You are not connected to the internet right?
Your PC is connected to the LAN port.
Pick up an attached phone on line 1, dial *#456987#
If the code works the device will reboot automatically (Watch the lights and hear the clicking relays)
After that… you can log in as supervisor via a web browser pointed at http://172.25.25.1/
username: supervisor
password: GoHaWk3Y3$
$KunK$pit is the previous firmware password. L!ngo likes to change passwords during firmware updates.
Once logged in as supervisor you have to disable DOS denial of service and Zero out the Provisioning entries;
otherwise you will not be able to log in as supervisor once connected to the internet.
This device downloads configs from l!ngo (after hard reset) and locks itsself. You must avoid this automatic download,
and disabled it from happening in the future.
If you are unable to enter supervisor mode, the machine may have internet connection after hard reset code *#456987# and is
downloading config file and locking itsself from the internet. You must disconnect internet before performing hard reset!!!
Configure USER and SIP settings for your new VOIP provider.
contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.
other notes:
There are “feature codes” listed inside the L!ngo adapter’s interface that you might want to check out.
user mode access to the device (unnecessary)
username: user
password: ph3taswe
Conference and Transfer Calls Procedures (tested while connected via PiaF IP PBX and voicepulse)
Step 1 Perform a hookflash to place the current call on hold and obtain a second dial tone.
Step 2 At the dial tone, enter the telephone number or speed dial of the third party and wait for the call to ring.
Step 3 You have the following options:
•To transfer the call, hang up when the call rings or when the third party answers.
•To return to the original call, perform a hookflash before the call rings. If you perform a hookflash before the third party answers but after the call rings, you also return to the original call. If the transfer picks up and you perform a hook flash, you will conference call.
•If you hang up during a conference, you will terminate the call for all parties.
contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.
I want my clients’ sites to be up all the time, but I don’t want to mess around with changing DNS constantly, its too much out of my control. It can take 24 hours to propagate, and the problem affecting a website is often resolved before DNS propagation could be reversed.
In short, I don’t want DNS to change unless it has to.
I have written a PHP script that could be placed on a “free webhost”, such as the free credit webhost with a godaddy domain name, that will test a website through a cURL function and when successful then proceed to forward the visitor to that site, or otherwise forward the visitor to second, third or more hosts, depending on which one responds.. simply going down the list until one is active. You could even have the page reload until a successful connection is made.
Obviously, this will do nothing for when godaddy goes down, but it will allow me more control over what happens when my own servers go down.
This first version will check each time to make sure the host is active before forwarding the visitor to the verified host.
If anyone is interested, you may download it from my website. Its available for free, I only ask you to comment here on your suggestions for improvement.
I’d always be interested in hearing suggestions for features or improvement!
http://www.graphinex.com/files/websitePHPhostfailover.zip
Version 2 will be available soon but will have a one time cost of $10 via paypal to access the down-loadable copy. Show your appreciation for this program with a one time donation to fund the cost of further development by ording version 2 (not yet released).
Future features for version 2:
Optional Domain Masking – Load a site in a frame, instead of refreshing the location bar of the browser with the URL
Content Visibility Verification – A server application failure can interrupt your site being displayed properly. How often does some vital service of the website fail, such as MySQL, interruptiong service, but not taking down all services?
|
Be notified of page updates |
|
powered by ChangeDetection |