On the keyboard, press:

START  then RIGHT ARROW then SPACE

Alternatively:

CTRL-ESC then RIGHT ARROW then SPACE

Unit: L!ngo: iAN-02EX
Firmware: 2.8.2.63b (some steps may be different for other revisions)

contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.

So, you had the l!ngo service, or obtained an old l!ngo adapter, and now you need to re-program it? Here are the instructions!

WARNING: This will erase the settings on your device. Don’t do this unless you mean to use it with a different voip provider than l!ngo!

LEGAL: Anyone worried about whether or not its legal to hack a device you own and no longer use, go see a shrink or find something else to spend your time worrying about. Do this proceedure at your own risk. We in no way claim responsibility.

To set up another voip provider, or even a SIP IP PBX, follow these instructions. I can’t take complete credit for this, but I must admit I
could not find it all in one place so here I have assembled and embelished it.

Set your computer’s local IP address to 172.25.25.2 (it must be on the subnet for the adapter config)

You need to HARD RESET this box while not connected on the internet via attached telephone to phone port 1

Double check: You are not connected to the internet right?

Your PC is connected to the LAN port.

Pick up an attached phone on line 1, dial *#456987#

If the code works the device will reboot automatically (Watch the lights and hear the clicking relays)

After that… you can log in as supervisor via a web browser pointed at http://172.25.25.1/

username: supervisor
password: GoHaWk3Y3$

$KunK$pit is the previous firmware password. L!ngo likes to change passwords during firmware updates.

Once logged in as supervisor you have to disable DOS denial of service and Zero out the Provisioning entries;
otherwise you will not be able to log in as supervisor once connected to the internet.

This device downloads configs from l!ngo (after hard reset) and locks itsself. You must avoid this automatic download,
and disabled it from happening in the future.

If you are unable to enter supervisor mode, the machine may have internet connection after hard reset code  *#456987#  and is
downloading config file and locking itsself from the internet. You must disconnect internet before performing hard reset!!!

Configure USER and SIP settings for your new VOIP provider.

contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.

other notes:

There are “feature codes” listed inside the L!ngo adapter’s interface that you might want to check out.

user mode access to the device (unnecessary)

username: user
password: ph3taswe

Conference and Transfer Calls Procedures (tested while connected via PiaF IP PBX and voicepulse)

Step 1 Perform a hookflash to place the current call on hold and obtain a second dial tone.

Step 2 At the dial tone, enter the telephone number or speed dial of the third party and wait for the call to ring.

Step 3 You have the following options:

•To transfer the call, hang up when the call rings or when the third party answers.

•To return to the original call, perform a hookflash before the call rings. If you perform a hookflash before the third party answers but after the call rings, you also return to the original call. If the transfer picks up and you perform a hook flash, you will conference call.

•If you hang up during a conference, you will terminate the call for all parties.

contact GRAPHiNEX.com Geeks for PAID SUPPORT. paypal $25/call, guaranteed to get your adapter unlocked. 9am-5pm EST. Ask for FRANK.

In short, I don’t want DNS to change unless it has to.

I have written a PHP script that could be placed on a “free webhost”, such as the free credit webhost with a godaddy domain name, that will test a website through a cURL function and when successful then proceed to forward the visitor to that site, or otherwise forward the visitor to second, third or more hosts, depending on which one responds.. simply going down the list until one is active. You could even have the page reload until a successful connection is made.

Obviously, this will do nothing for when godaddy goes down, but it will allow me more control over what happens when my own servers go down.

This first version will check each time to make sure the host is active before forwarding the visitor to the verified host.

If anyone is interested, you may download it from my website. Its available for free, I only ask you to comment here on your suggestions for improvement.

I’d always be interested in hearing suggestions for features or improvement!

http://www.graphinex.com/files/websitePHPhostfailover.zip

Version 2 will be available soon but will have a one time cost of $10 via paypal to access the down-loadable copy. Show your appreciation for this program with a one time donation to fund the cost of further development by ording version 2 (not yet released).

Future features for version 2:

Optional Domain Masking – Load a site in a frame, instead of refreshing the location bar of the browser with the URL

Content Visibility Verification – A server application failure can interrupt your site being displayed properly. How often does some vital service of the website fail, such as MySQL, interruptiong service, but not taking down all services?

To migrate data from old computer to new computer:

Click start run

Navigate to UPS – Run the ups support util

Click data maintenance

Click backup

Click add (this will run a backup)

Navigate to:

C:\UPS\WSTD\Support\DBSupport

Coppy the DBsupport folder to the new machine

Use the restore feature inside the ups support utility on the new machine to reverse the process.

Comment here with any difficulties you have and I’ll adjust the above instructions.

If you’d like to demo our product please contact our sales team and arrange a demonstration or explanation of features.

Features:

• Detects attempts to access web application vulnerabilities
• Reports access attempts
• Provides whois.net information for each offender
• Operates 24 hours a day without additional load on server
• Integrates with any web server running PHP
• Emails intrusion alarm alerts

Future Potential Features:

• Provide automatic ALARM LEVEL feedback based on analysis of whois.net info
• Automatically deny hosts based on repeated failures
• Ability to whitelist certain IPs, organizations or blocks

This sample is a FALSE ALARM in that ir is a Yahoo spider robot doing its rounds and asking for a robot.txt file, which is relatively harmless in the grand scheme of things. Nonetheless, it presents you with the classic sample of output generated by an access attempt made to the system. Also, IP addresses have been partially masked.

Site license available for $25. Use it on as many websites/servers as you desire.

Have it installed by our experts for $99.

Call, chat with us or email us for a free demo.

Here is a sample of a potential “attempted hack” reported by our software:

———————————————————————————

SERVER INTRUSION ATTEMPT DETECTED

Intruder IP address:67.195.112.xx

——————————————————————————–

Automatic reverse search results follow:

ARIN: WHOIS Database Search

ARIN WHOIS Database Search
Relevant Links: ARIN Home Page ARIN Site Map
Training: Querying ARIN’s WHOIS

Search ARIN WHOIS for: 67.195.112.xx

OrgName:    Yahoo! Inc.
OrgID:      YHOO
Address:    701 First Ave
City:       Sunnyvale
StateProv:  CA
PostalCode: 94089
Country:    US

NetRange:   67.195.0.0 – 67.195.255.255
CIDR:       67.195.0.0/16
NetName:    A-YAHOO-US8
NetHandle:  NET-67-195-0-0-1
Parent:     NET-67-0-0-0-0
NetType:    Direct Allocation
NameServer: NS1.YAHOO.COM
NameServer: NS2.YAHOO.COM
NameServer: NS3.YAHOO.COM
NameServer: NS4.YAHOO.COM
NameServer: NS5.YAHOO.COM
Comment:
RegDate:    2007-09-13
Updated:    2007-12-07

RAbuseHandle: NETWO857-ARIN
RAbuseName:   Network Abuse
RAbusePhone:  +1-408-349-3300
RAbuseEmail:  network-abuse@cc.yahoo-inc.com

RTechHandle: NA258-ARIN
RTechName:   Netblock Admin
RTechPhone:  +1-408-349-3300
RTechEmail:  rauschen@yahoo-inc.com

OrgAbuseHandle: NETWO857-ARIN
OrgAbuseName:   Network Abuse
OrgAbusePhone:  +1-408-349-3300
OrgAbuseEmail:  network-abuse@cc.yahoo-inc.com

OrgTechHandle: NA258-ARIN
OrgTechName:   Netblock Admin
OrgTechPhone:  +1-408-349-3300
OrgTechEmail:  rauschen@yahoo-inc.com

# ARIN WHOIS database, last updated 2010-04-02 20:00
# Enter ? for additional hints on searching ARIN’s WHOIS database.
#
# ARIN WHOIS data and services are subject to the Terms of Use
# available at https://www.arin.net/whois_tou.html

Other WHOIS Servers: AfriNIC APNIC LACNIC RIPE InterNICRequest Bulk Copies of ARIN WHOIS DataCopyright © 1997-2007 American Registry for Internet Numbers. All Rights Reserved.

——————————————————————————–

URL Transaction Request Information:

Server IP:GET

404

xxx.graphinex.com

*/*

Mozilla/5.0 (compatible; Yahoo! Slurp; http://help.yahoo.com/help/us/ysearch/slurp)

gzip, x-gzip

Apache/2.2.11 (Win32) PHP/5.2.8

xxx.graphinex.com

192.168.2.xxx

80

67.195.112.xx

C:/wamp/www/

admin@localhost

C:/wamp/www/xxx.php

35877

/robots.txt

CGI/1.1

HTTP/1.0

GET

/robots.txt

/xxx.php

/xxx.php

963428348

———————————————————————-

Using our email list stripper tool and a little know-how, you can now make this task a lot easier.

Our tool does not accept .XLS file input, but you can paste the contents of a .CSV.

Tips for email list manipulation in excel:

- Save your file as a new version you can modify and edit without corrupting the original.

- Erase columns of un-necessary information that do not include email addresses.

- Save from excel as a .CSV file (FILE-SAVE AS – comma seperated value, essentially text!)

- Open the .CSV file in a text editor (wordpad recommended) using FILE-OPEN from wordpad’s menu. (Choose to open all files not just .txt)

- Paste content from wordpad into the email stripper to generate a viable list when pressing the “activate” button.

- Please note there is more than one way to do the above steps.

Ever needed to send an email to a group of people? We all have, and have had to deal with cutting and pasting lists of email addresses. It can be a pain to edit these lists by hand. Thats why we made this tool.

http://www.graphinex.com/emailstripper

• Removes duplicate email addresses from a list.
• Removes extra formatting from text content producing a viable list.
• Imports web URLs for processing into email lists.
• Can result in comma or return delimited output for easy cut and paste into your application.
• Completely Free.

Ever needed to send an email to a group of people? We all have, and have had to deal with cutting and pasting lists of email addresses. It can be a pain to edit these lists by hand. Thats why we made this tool.

http://www.graphinex.com/emailstripper

• Removes duplicate email addresses from a list.
• Removes extra formatting from text content producing a viable list.
• Imports web URLs for processing into email lists.
• Can result in comma or return delimited output for easy cut and paste into your application.
• Completely Free.

http://www.graphinex.com/emailstripper/

• Web based tool runs in browser
• Removes duplicate emails
• Strips unwanted content, characters
• Can pull content from URL source or text pasted

Sure, we all have!

That’s why we created http://www.graphinex.com/emailstripper/

- Enter in a website URL or text file content in the correct field(s).
- Email Stripper provides you a duplicate-removed list of all emails available on the single page.
- Web based tool means you can access it from anywhere.
- Free to use any time, all the time.
- If its abused by bots we will install a CAPTCHA.

Have fun with it!